TriboTEX Engine Guide

TriboTEX Engine Guide

How do I use a TriboTEX Engine treatment?

Simply add TriboTEX to your engine oil fill between oil changes. Within 15 minutes, you’ll notice a reduction in noise. As you drive for the next 500 mi/800 km, TriboTEX nanoparticles are forged into a diamond-like armor on your engine.

Wait at least 500 mi/800 km after treating before changing your oil.

Check your oil level and change it regularly. Our mechanics recommend treating every 40,000 mi/64,000km, or annually if you are a heavy user.

    1. Warm up your engine, then shut it off.
    2. Locate the engine oil fill port and remove cap.
    3. Inject treatment.
    4. Let idle for 15 minutes.

    1. Warm up your engine, then shut it off.
    2. Once cool enough to do so safely, remove spark plug
    3. Inject treatment directly into cylinder.
    4. Replace spark plug and let idle for 15 minutes.

    • Related Articles

    • TriboTEX Transmission Guide

      How do I use a TriboTEX Transmission treatment? See instructions below. A transmission flush is not necessary before applying. Our mechanics recommend treating every 80,000 mi/128,000 km. Gently warming the tube will improve application. Do not ...
    • Two-Stroke Oil Injection

      Recommendations: For engines under 150 HP use TriboTEX Mini For engines over 150 HP use TriboTEX Original TriboTEX Original is safe in engines under 150 HP Directions: Add TriboTEX to favorite 2-stroke engine oil Mix well with engine oil before ...
    • Choosing the Right Treatment for Your Vehicle

      TriboTEX Engine is compatible with all engines and oils. All of our formulas contain the same patented nanoparticles, however the concentration and volume has been tailored for different sizes of vehicles. To determine the proper treatment for your ...
    • TriboTEX Compatibility with Other Commercial Additives

      TriboTEX can work with many commercial additives, however there are some specific methods that must be followed to gain the benefits of TriboTEX nanoparticles. TriboTEX fuses to metal surfaces under impact and friction. It needs a clean surface with ...
    • FAQs About Our Technology

      How does TriboTEX work? TriboTEX nanoparticles have two sides, one that binds and one that glides. The grippy side reinforces and strengthens, while the slippery side reduces friction. Just like carbon in the mantle of the earth, they self-align into ...